Bench Top Tumbling Bases


  • Glossy white reinforced fiberglass base.
  • Wet or dry tumbling, made for industrial use.
  • Solid steel bars, cast in urethane and precision ground.
  • Available in 2 speed or variable speed.
  • Great for deburring small parts.
  • Easy to separate.
  • Inexpensive steel ball burnishing solution.
  • Can run different size barrels at the same time.


Mini-Max (2 bar base)
  • Dimensions: length 23” x width 16” x height 13”
  • Bar Length: 9.25”
  • Inside Bar Spacing: 4.5”
  • Bar Diameter: 1”
  • Motor: 1/3 HP, 120 V, 60 Hz*
  • RPM: 1725 / 1140
    (shown with two TL-2 barrels. Barrels sold separately)
 Mini-Max

2 Bar Tumbler Base
  • Dimensions: length 36” x width 19” x height 13”
  • Bar Length: 24”
  • Inside Bar Spacing: 7.5”
  • Bar Diameter: 1”
  • Motor: 1/3 HP, 120 V, 60 Hz*
  • RPM: 1725 / 1140
    (shown with one TL-4 and two TL-3 barrels. Barrels sold separately)
 2 Bar Tumbling Base

3 Bar Tumbler Base
  • Dimensions: length 36” x width 19” x height 13”
  • Bar Length: 24”
  • Inside Bar Spacing: 3.5”
  • Bar Diameter: 1”
  • Motor: 1/3 HP, 120 V, 60 Hz*
  • RPM: 1725 / 1140
    (shown with eight TL-1 barrels. Barrels sold separately)
 3 Bar Tumbling Base

Bench Top Tumbling Barrels


Bench Top Tumbling Barrels

  TL-1 TL-2 TL-3 TL-4 TL-6
Physical Characteristics:
Total Capacity 22 fl.oz. 3.5 qts. 1.5 gal. 2.5 gal. 8.0 gal.
Net Weight 1.5 lbs. 2.5 lbs. 3.0 lbs. 4.0 lbs. 9.0 lbs.
Diameter 4.75" 8.25" 10.0" 10.75" 15.75"
Height 4.75" 4.375" 7.0" 10.5" 14.75"
Barrel Opening 3" 4" 4" 4" 7.25"
 
Barrel RPMs on Low or High speed
Low 29 36 29 25 18
High 44 54 43 40 27
 
Maximum Barrels per base
Mini-Max 2 2 1 1 0
2 Bar 0 4 3 2 1
3 Bar 8 0 0 0 0